192 Technical data
Auxiliary circuit power consumption
Maximum external power supply:
Frames R1…R5: 25 W, 1.04 A at 24 V AC/DC (with
option modules CMOD-01, CMOD-02)
Frames R6…R9: 36 W, 1.50 A at 24 V AC/DC (as
standard, terminals 40…41)
Efficiency
Approximately 98% at nominal power level
Degree of protection
Degree of protection
(IEC/EN 60529)
IP21, IP55
Enclosure types
(UL508C)
UL Type 1, UL Type 12
Overvoltage category
(IEC 60664-1)
III
Protective classes
(IEC/EN 61800-5-1)
I
Ambient conditions
Environmental limits for the drive are given below. The drive is to be used in a heated, indoor,
controlled environment. All printed circuit boards are conformal coated.
Operation
installed for
stationary use
Storage
in the protective
package
Transportation
in the protective
package
Installation site altitude • 0 to 4000 m
(13123 ft)
above sea level
1)
• 0 to 2000 m
(6561 ft) above
sea level
2)
Output derated
above 1000 m
(3281 ft), see
page 166.
--
Air temperature -15 to +50 °C
(5 to 122 °F).
0 to -15 °C
(32 to 5 °F): No
frost allowed.
See section
Ratings.
-40 to +70 °C
(-40 to +158 °F)
-40 to +70 °C
(-40 to +158 °F)
To Next Page
Loading...
