194 Technical data
Shock/Drop (ISTA) Not allowed
R
1
…R4 (ISTA 1A):
Drop, 6 faces, 3
edges and 1 corner
R5…R9 (ISTA 3E): Shock, incline
impact: 1.1 m/s (3.61 ft/s)
Shock, rotational edge drop: 200 mm
(7.9 in)
1)
For neutral-grounded TN and TT systems and non-corner grounded IT systems.
See also section Limiting relay output maximum voltages at high installation altitudes on
page 86.
2)
For corner-grounded TN, TT and IT systems
Materials
Drive enclosure • PC/ABS 3 mm, PC+GF10 3mm, color NCS 1502-Y
(RAL 9002 / PMS 1C Cool Grey), RAL 9002 and PMS
425 C
• hot-dip zinc coated steel sheet 1.5 to 2.5 mm, thickness
of coating 100 micrometers, color NCS 1502-Y
Package Plywood, cardboard and molded pulp. Foam cushions PE,
PP-E, bands PP.
Disposal The main parts of the drive can be recycled to preserve
natural resources and energy. Product parts and materials
should be dismantled and separated.
Generally all metals, such as steel, aluminum, copper and
its alloys, and precious metals can be recycled as
material. Plastics, rubber, cardboard and other packaging
material can be used in energy recovery. Printed circuit
boards and DC capacitors (C1-1 to C1-x) need selective
treatment according to IEC 62635 guidelines. To aid
recycling, plastic parts are marked with an appropriate
identification code.
Contact your local distributor for further information on
environmental aspects and recycling instructions for
professional recyclers. End of life treatment must follow
international and local regulations.
Applicable standards
The drive complies with the following standards. The compliance with the European Low
Voltage Directive is verified according to standard EN 61800-5-1.
Weight range mm in
0…10 kg (0…22 lb)
760 29.9
10…19 kg (22…42 lb)
610 24.0
19…28 kg (42…62 lb)
460 18.1
28…41 kg (62…90 lb)
340 13.4
To Next Page
Loading...
