ABB ACS580-01 - Control Panel Door Mounting Kits; Type Designation Label

38 Operation principle and hardware description
 Control panel door mounting kits
Door mounting kits for the control panel are available. For more information see
DPMP-01 mounting platform for control panels (3AUA0000100140 [English]) or
DPMP-02/03 mounting platform for control panels (3AUA0000136205 [English].
Type designation label
The type designation label includes IEC and NEMA ratings, appropriate markings
and the type designation and serial number, which allow identification of each drive.
The type designation label is located on the left side of the drive, see section
Locations of the labels on the drive. An example label is shown below.
No. Description
1 Type designation, see section Type designation key on page 40.
2 Name and address of the manufacturer
3Frame (size)
4 Type of the drive, for example, with Air cooling or Liquid cooling, and so on.
5 Degree of protection
6 Nominal ratings in the supply voltage range, see section Ratings on page160, section
Electrical power network specification on page 183 and section Motor connection data
on page 183.
Input voltage range 3~ 380…480V AC. This is indicated in the type designation label as
typical input voltage levels (U
1
) (3~ 400/480V AC). See page 183 for further information.
7 Valid markings
8 S/N: Serial number of format MYYWWXXXX, where
M:
Manufacturing plant
YY:
16, 17, 18, … for 2016, 2017, 2018, …
WW:
01, 02, 03, … for week 1, week 2, week 3, …
XXXXX:
Digits making the serial number unique
1
3
6
7
8
4
5
2