Applicable standards
The drive complies with the standards below. The compliance with the European Low
Voltage Directive is verified according to standard EN 61800-5-1.
European electrical safety requirements product standards
Adjustable speed electrical power drive systems. Part 5-1: Safety requirements –
electrical, thermal and energy
EN 61800-5-1:2007
Semiconductor converters – General requirements and line commutated converters
– Part 1-1: Specification of basic requirements
IEC 60146-1-1:2009
EN 60146-1-1:2010
Safety of machinery. Electrical equipment of machines. Part 1: General require-
ments.
IEC 60204-1:2005
+A1:2008
EN 60204-1:2006
+AC:2010
Provisions for compliance: The final assembler of the machine is responsible for
installing emergency-stop device.
Degrees of protection provided by enclosures (IP code)
IEC 60529:1989
EN 60529:1991
Insulation coordination for equipment within low-voltage systems. Part 1: Principles,
requirements and tests
IEC/EN 60664-1:2007
Low-voltage switchgear and control gear assemblies -- Part 1: General rules
IEC/EN 61439-1:2011
Enclosures for Electrical Equipment, Non-Environmental Considerations, 13th
edition
UL 50:2015
UL Standard for Safety, Power Conversion Equipment, fourth edition
UL 508C: 2016
Industrial control equipment
CSA C22.2 No. 14-13:
2013
Adjustable Speed Drives
CSA 22.2 No. 274-13:
2013
EMC performance
Adjustable speed electrical power drive systems. Part 3: EMC requirements and
specific test methods
IEC 61800-
3:2004/A1:2011
EN 61800-3/A1:2012
Technical data 215
To Next Page
Loading...
