ABB ACS580-07 - 2 Introduction to the Manual; Contents of this Chapter; Target Audience; Related Manuals

Introduction to the manual
Contents of this chapter
This chapter describes the manual. It contains a flowchart of steps in checking the delivery,
installing and starting up the drive. The flowchart refers to chapters/sections in this manual
and to other manuals.
Target audience
This manual is intended for people who plan the installation, install, start up and service the
drive, or create instructions for the end user of the drive concerning the installation and
maintenance of the drive.
Read the manual before working on the drive. You are expected to know the fundamentals
of electricity, wiring, electrical components and electrical schematic symbols.
The manual is written for readers worldwide. Both SI and imperial units are shown.
Related manuals
CodeName
Drive hardware manuals and guides
Multilingual code:
3AXD50000037978
Drive/converter/inverter safety instructions
3AXD50000045815
ACS580-07 drives /75 to 500 kW) hardware manual
3AXD50000210268
Converter module lifting device for drive cabinets hardware manual
3AUA0000085685
ACX-AP-x Assistant control panels user’s manual
Drive firmware manuals and guides
3AXD50000016097
ACS580 standard control program firmware manual
3AXD50000048035
Quick start-up guide for ACS580 drives with ACS580 standard control program
2
Introduction to the manual 27