ABB ACS580-07 - Door Switches and Lights; Main Switch-Disconnector Q1; Control Panel

￭ Door switches and lights

1 2 3
4 5
6
DescriptionLabel in local
language
Label in English
Ready pilot light (option +G327)-READY1
Run pilot light (option+G328)-RUN2
Fault pilot light (option +G329)-FAULT3
Operating switch with option +F250
0 Opens the main contactor (Q2) and disables starting of the drive
1 Closes the main contactor (Q2)
-MAIN CONT.
OFF ON
4
Emergency stop indication light and reset push button with options
+Q951 and +Q963
-EMERGENCY
STOP RESET
5
Emergency stop push button with options +Q951 and +Q963-EMERGENCY
STOP
6
Main switch-disconnector Q1
The switch-disconnector handle switches the main voltage to the drive on and off.
￭ Control panel
The control panel is the user interface of the drive. It provides the essential controls such
as Start/Stop/Direction/Reset/Reference, and the parameter settings for the control program.
One control panel can be used to control several drives through a panel link.
The control panel can be removed by pulling it forward from the top edge and disconnecting
the panel cable. The panel is reinstalled in reverse order. For the use of the control panel,
see the firmware manual or ACX-AP-x Assistant control panel user’s manual
(3AUA0000085685 [English]).
Operation principle and hardware description 43