ABB ACS580-07 - General Guidelines - North America

￭ General guidelines – North America
Make sure that the installation is in accordance with national and local codes. Obey these
general guidelines:
• Use separate conduits for the input power, motor, brake resistor (optional), and control
cabling.
• Use separate conduit for each motor cabling.
The drawing below illustrates general guidelines for routing input power and motor cabling
in conduits.
11
1 1
1
2
22
2
2
3
3 3
3
Input power cabling1
Motor cabling2
Conduit3
76 Guidelines for planning the electrical installation