Electrical installation – Global
(IEC)
Contents of this chapter
This chapter describes how to:
• measure the insulation
• do the grounding system compatibility check
• change the EMC filter or ground-to-phase varistor connection
• connect the power and control cables
• install optional modules
• connect a PC.
Warnings
WARNING!
Obey the safety instructions of the drive. If you ignore them, injury or
death, or damage to the equipment can occur. If you are not a qualified
electrical professional, do not do installation, commissioning or
maintenance work.
Required tools
To do the electrical installation, you need these tools:
6
Electrical installation – Global (IEC) 129
To Next Page
Loading...
