Two EMC filter grounding screws, 11a:
EMC (DC) and 11b: (EMC (AC). For dis-
connecting, see page 136 (IEC) or page
181 (North America).
11
Input power connection (L1, L2, L3),
motor connection (T1/U, T2/V, T3/W)
and DC connection (UDC+, UDC-)
12
PE connection (power line)13
Grounding connection (motor)14
Cable box plate15
Cable entry16
Main cooling fan17
Cable tie mounts for /I/O cables18
Auxiliary cooling fan connector19
Lifting points (6 pieces)20
Mounting points (6 pieces: 2 at the top,
2 at the bottom of the main part of the
frame, 2 at the top of the cable box)
1
Cover2
Cable/conduit box3
Cover screws (2 pieces)4
Control panel5
Control panel connection6
Cold configuration connection for CCA-
01
7
Power OK and Fault LEDs. See section
LEDs (page 262).
8
I/O connections. See External control
connection terminals, frames
R1…R5 (page 49).
9
Varistor grounding screw (VAR). For
disconnecting, see page 136 (IEC) or
page 181 (North America).
10
Operation principle and hardware description 45
To Next Page
Loading...
