Varistor grounding screw (VAR), under
the control panel platform. For discon-
necting, see page 136 (IEC) or page 181
(North America).
13
Two EMC filter grounding screws, 14a:
EMC (DC) under the control panel plat-
form and 14b: (EMC (AC) at the left,
above the shroud. For disconnecting,
see page 136 (IEC) or page 181 (North
America).
14
Shroud. Under the shroud: Input power
connection (L1, L2, L3), motor connec-
tion (T1/U, T2/V, T3/W) and DC connec-
tion (UDC+, UDC-)
15
PE connection (power line)16
Grounding connection (motor), under
the shroud (15)
17
Cable entry18
Main cooling fan19
Auxiliary cooling fan20
Mounting points (6 pieces: 2 at the top,
2 at the bottom of the main part of the
frame, 2 at the top of the cable box)
1
Cover2
Cable/conduit box3
Heatsink4
Lifting points (6 pieces)5
Control panel6
Control panel connection7
Cold configuration connection for CCA-
01
8
Power OK and Fault LEDs. See section
LEDs (page 262).
9
I/O connections. See External control
connection terminals, frames
R6…R9 (page 50).
10
Cable tie mounts for /I/O cables11
Clamps for I/O cable mechanical sup-
port
12
Operation principle and hardware description 47
To Next Page
Loading...
