Necessary tools
To move a heavy drive, you need a crane, fork-lift or pallet truck (check load
capacity!).
To lift a heavy drive, you need a hoist.
To install the drive mechanically, you need the following tools:
• drill with suitable bits
• screwdriver set (Torx, flat and/or Phillips, as appropriate)
• torque wrench
• socket set, Hex key set (metric)
• tape measure, if you will not be using the provided mounting template.
Moving the drive
Frames R5…R9: Move the transport package by pallet truck to the installation site.
66 Mechanical installation
To Next Page
Loading...
