For more information on flange mounting, see Flange mounting kit installation
supplement (3AXD50000019100 [English]).
Strut channel installation (US only)
Contents of the mounting kit:
• Upper mounting clip labeled “Top”
• Lower mounting clip labeled “Bottom”
￭
Installation instructions
Install clips when mounting frame sizes R1…R3 to strut channel.
1. Slide clips onto respective upper and lower mounting flanges of the drive.
2. Push until they click into place.
Cabinet installation (options +P940 and +P944)
See:
Code (English)Name
3AUA0000107668Drive modules cabinet design and construction instructions
3AXD50000210305ACS580…, ACH580… and ACQ580… +P940 and +P944 drive modules
supplement
94 Mechanical installation
To Next Page
Loading...
