ABB ACS800-02 - Type Code Selections

To Next Page

To Previous Page

The ACS800-02/U2

Control panel 0J400 no control panel, LEDs on the panel mounting platform included

I/O L504 additional terminal block X2 (+C111 required)

L505 thermistor relay (1 or 2 pcs, +C111 required)

L506 Pt100 relay (3 pcs, +C111 required)

L... Refer to ACS800 Ordering Information (EN code: 64556568).

Fieldbus K... Refer to ACS800 Ordering Information (EN code: 64556568).

Application program N...

Language of manual R...

Specialities P901 coated boards

P904 extended warranty

Type code selections for the ACS800-U2

Selection Alternatives

Product series ACS800 product series

Type U2 free standing (USA). When no options are selected: 6-pulse diode bridge, UL type 1,

Control Panel CDP312R, no EMC filter, US version of the Standard Application

Program (three-wire start/stop as default setting), US enclosure extension (top entry,

top exit), US gland/conduit plate, common mode filter in frame size R8, boards

without coating, one set of manuals.

Size Refer to Technical data: NEMA ratings.

Voltage range

(nominal rating in bold)

2 208/220/230/240 VAC

5 380/400/415/440/460/480 VAC

+ options

Construction 0C111 no enclosure extension, bottom entry/exit of cables

Resistor braking D150 brake chopper

Filter E202 EMC/RFI filter for first environment TN (grounded) system, restricted (the A limits)

E210 EMC/RFI filter for second environment TN/IT (grounded/ungrounded) system

E208 common mode filter for frame size R7

E209 light common mode filter for frame size R7

Line options (enclosure

extension required)

F250 line contactor

Q951 emergency stop of category 0

Cabinet options

(enclosure extension

required)

G320 230 VAC auxiliary voltage transformer

Cabling H350 bottom entry (+H352 required)

H352 bottom exit ( +H350 required)

H357 European lead-through plate