ABB ACS800-04M - Replacing the Capacitor Pack (R8)

96 Maintenance
 Replacing the capacitor pack (R8)
1. Remove the front cover. Remove the profiled side plate.
2. Disconnect the discharging resistor wires.
3. Remove the fastening screws.
4. Lift the capacitor pack out.
5. Install the new capacitor pack in reverse order to the above.
3
3
2
2
M10
M6
2 pcs
M6x12 combi screw
3
3
3
3
3
4
At the rear side (view from
below)
2 pcs in
690 V units
2
3