ABB ACS800-17 - Frame R7 i

The ACS800-17
29
Frame R7i
The picture below shows the main components of a frame R7i drive with the door
and the swing-out frame open.
10
9
7
8
5
4
3
2
No. Description
1 Swing-out frame (see page 31) (not shown). The drive
control units for both converter modules are installed on
the swing-out frame.
2 Cable entries for power and control cables (bottom
cable entry/exit models)
3 Cable entries for power and control cables (top cable
entry/exit models)
4 Switch fuse
5 Auxiliary voltage transformer
6 Line-side converter module
7 LCL filter
8 Motor-side converter module
9 Input terminals
10 Output terminals
1
6