The ACS800-37
27
Swing-out frame
The swing-out frame provides space for the control circuitry of the drive as well as
optional electrical equipment. The frame can be opened by removing the two locking
screws (arrowed in the picture below) and moving the swing-out frame aside.
Depending on the frame size of the drive, the actual equipment of the drive may
differ from what is depicted.
Mounting rails for
additional equipment
Remove screws (arrowed) to
open swing-out frame
Drive control unit
(RDCU) with I/O
terminal blocks
Space for optional
terminal block X2
Terminal block X1
I/O cable entries into
swing-out frame
Swing-out frame open
To Next Page
Loading...
