ABB ACS800 Series - Settings; Diagnostics

Program features
47
Settings
Diagnostics
Parameter Additional Information
35.01…35.03 Motor 1 temperature measurement
98.12 Activation of optional analog I/O
Other
Parameters 13.16…13.20 and 15.11…15.15 are not effective.
At the motor end the cable shield should be grounded through a 10 nF capacitor. If this is not
possible, the shield is to be left unconnected.
The NAIO module must also be connected to a power supply. See the module manual.
Actual Values Additional Information
01.35 Temperature value
02.15 Warning bit state
02.18 Fault bit state
02.20 Fault bit state
Warnings
MOTOR 1 TEMP Chapter Fault tracing and parameter 02.15
T MEAS ALM Chapter Fault tracing and parameter 02.15
Faults
MOTOR 1 TEMP Chapter Fault tracing and parameter 02.20