12 Product materials
Materials of frame R5
The main components are shown in the figure below.
ACS880-01 frame R5 product materials
Total weight
(kg) ~23
Part Category Qty Materials Weight (g)
1 Sheet metal parts 16…
17
Zn plated Fe 6190…6730
2 Reinforced plastic parts 2 Plastic: PC+10%GF 270
3 Deck part 1 Plastic: PC+10%GF, PUR 620
4 Housing parts 2 Plastic: ABS PC, PUR, Brass 1210
5 Terminal cover 1 Plastic: PC 40
6 Housing / Cover parts 4 Plastic: ABS PC 1310
7 Heat sink 2 Aluminum: AW-6060 [Al MgSi] 3100
8 Choke 1 Fe, Cu, PET+30%GF, silicone, thermoplastic polyester, glass-
filled nylon.
6040
9 Gaskets 7 Rubber: TPE 140
10 Axial fan 1 Various materials, plastic parts: PBT 370
11 Printed circuit board 3 Various materials, electronic components. 1820…2210
12 Bus bars 3 Cu, Sn 110…250
13 Terminal connectors 8 SS, Sn plated Cu, Zn plated steel 340
14 Semiconductors 4 Cu, Al oxide, Sn, silicone gel, PBT, GF 580
15 Control unit 1 See subsection Materials of the control unit on page 15. 550
16 Control panel 1 See subsection Materials of the control panel on page 16. 130
Cables / Wires N/A PVC, Cu, GF, Sn, Au, Ni, phosphor bronze, thermoplastic
polyester, glass-filled nylon.
150
To Next Page
Loading...
