228 Ordering information
The main switch-disconnector kit contains:
• main switch-disconnector unit
• handle with on/off indication
• shaft
• 1× normally-open auxiliary contact.
For the contents of the main circuit breakers, see section Contents of the main circuit
breakers on page 319. For the dimension drawing of the main switch-disconnector, see
section Main switch-disconnector on page 373. For the dimension drawing of the main
circuit breaker, see section Main circuit breaker on page 380.
Main circuit breaker and wagon cover
You must order one cover (1SDA0, 64003259) for the main circuit breaker. One cover
IP54 flange, key N.20005 E2.2…E6.2 (1SDA073869R1, 3AXD50000049760) is needed
for each main circuit breaker/wagon pair.
IEC busbar shim kits
Use busbar shim kit for adapting E2.2S-A and E4.2S-A main circuit breakers to IEC
busbars.
Type Data Ordering code Illustration
E2.2S-A EMAX2 E2.2 busbar
shim kit
3AXD50000286324
Instruction code: 3AXD50000286072
E4.2S-A EMAX E4.2 busbar shim
kit
3AXD50000286782
Instruction code: 3AXD50000286973
To Next Page
Loading...
