Ordering information 265
The main switch-disconnector kit contains:
• main switch-disconnector unit
• handle with on/off indication
• shaft
• 1 × normally-open auxiliary contact.
For the contents of the main circuit breakers, see section Contents of the main circuit
breakers on page 319. For the dimension drawing of the main switch-disconnector, see
section Main switch-disconnector on page 373. For the dimension drawing of the main
circuit breaker, see section Main circuit breaker on page 380.
Main circuit breaker and wagon cover
You must order one cover (1SDA0, 64003259) for the main circuit breaker. One cover
IP54 flange, key N.20005 E2.2…E6.2 (1SDA073869R1, 3AXD50000049760) is needed
for each main circuit breaker/wagon pair.
IEC busbar shim kits
See page 228.
Supply unit AC fuses
These fuses protect the supply module for short circuits. Supply unit AC fuses are used in
such ACS880-04 configurations that there is a main circuit breaker, or a main switch-
disconnector and a main contactor in case of two or more supply modules (6-pulse) or four
or more supply modules (12-pulse). For the dimension drawings, see section AC fuses on
page 382.
Varistor kit (UL/CSA)
See page 200.
Shaft dimensions
D Shaft diameter
L Shaft length
ACS880-04-…
Fuse (IEC) Qty Ordering code
Type Data
U
N
= 690 V (Range 525 … 690 V)
2300A-7 170M6417 1400 A, 690 V 9 3AXD50000000150
ACS880-04-…
Fuse (UL, CSA) Qty Ordering code
Type Data
U
N
= 690 V (Range 525 … 690 V)
2300A-7 170M6417 1400 A, 690 V 9 3AXD50000000150