Ordering information 271
AC-side components (2×D7T, Rittal TS 8 enclosure)
Common AC Flat-PLS assembly
When using the Rittal Flat-PLS system, this kit is used for correct positioning of the
common AC bus in the Rittal TS 8 enclosure.
Note: The designs presented in this manual for Rittal TS 8 enclosures employ the Rittal
Flat-PLS busbar system. Make sure that the current carrying capability of the busbars is
not exceeded at any point of the drive system.
AC busbar support
In D7T, AC busbars provide connection from the module input to the common AC Flat-
PLS.
Frame
size
Enclosure Qty Ordering code Kit code Illustration
All 600 mm 1 3AUA0000115905 A-468-X-011
Instruction code: 3AUA0000115893
Frame
size
Enclosure Qty Ordering code Kit code Illustration
2×D7T 600 mm 1 3AXD50000008831 A-6-7-150
Instruction code: 3AXD50000009155
To Next Page
Loading...
