48 Moving and unpacking the modules
Lifting the modules
Frame D7T: Lift the unpacked module by using a lifting device.
Frames D8T and R8i:
Lift the unpacked module only from its lifting holes.
Moving the modules
WARNING! If you ignore the following instructions, injury or death, or
damage to the equipment can occur.
• Use extreme caution when maneuvering a module that runs on wheels.
• The modules are heavy and have a high center of gravity. They topple over easily if
handled carelessly.
• Do not tilt the module. Do not leave the module unattended on a sloping floor.
• Use protective gloves! The edges of the module are sharp!
For moving and lifting the modules, see sections Replacing the supply module (frame
D7T) on page 167, Replacing the supply module (frame D8T) on page 171, and Replacing
the inverter module (frame R8i) on page 175.
To Next Page
Loading...
