62 Cabinet construction
Installation examples
WARNING! The code labels attached to mechanical parts such as
busbars, shrouds and sheet metal parts must be removed before
installation as they may cause bad electrical connections, or, after
peeling off and collecting dust in time, cause arcing or block the cooling air flow.
This section includes installation examples of the ACS880-04 single drive module
packages in the Rittal TS 8 and generic enclosures.
Each example includes a table that lists:
• installation stages of different equipment in the order in which the installation into the
cabinet should be performed
• code of the step-by-step instructions
• equipment kit code
• kit ordering code.
You can find the kit-specific assembly drawings, step-by-step instructions and kit
information on the Internet. Go to
https://sites-apps.abb.com/sites/lvacdrivesengineeringsupport/content. If needed, contact
your local ABB representative.
The example includes also cabinet assembly drawings that show each stage listed in the
table. More detailed steps of each stage are described in the kit-specific assembly
drawings.
For general instructions, see Cabinet design and construction instructions for ACS880
air-cooled and liquid-cooled multidrive modules (3AUA0000107668 [English]).
1×D8T module in Rittal TS 8 enclosure (6-pulse)
# Installation stage Instruction code Kit code Kit ordering code
1. Installation of common parts:
• Baying parts
• PE busbar [PE]
• Divider panel
• Bracket for Flat-PLS busbar
holder (common AC)
• Bracket for Flat-PLS busbar
holder (common DC)
• 3AUA0000114534
• 3AUA0000114474
• 3AUA0000115695
• 3AUA0000115893
• 3AUA0000115891
A-468-X-011
A-468-X-001
3AUA0000115905
3AUA0000115906
2. Module installation parts 3AUA0000115013 A-4-8-303 3AUA0000115057
3. Quick connector installation 3AUA0000115013
3AUA0000118667
A-468-8-100 3AUA0000119227
4. DC busbars 3AUA0000115847 A-4-8-201 3AUA0000115815
5. AC busbars to quick connector 3AUA0000115846 A-4-8-180 3AUA0000115077
6. AC busbar installation 3AXD50000004442 A-4-8-104 3AXD50000004437
7. Module installation 3AUA0000118641 - -
8. Shroud installation 3AUA0000116148 A-4-8-353 3AUA0000116182
To Next Page
Loading...
