Protection classes for module
IP21 (standard)Degrees of protection
(IEC/EN 60529) IP20 (option +P940)
IP55 (option +B056)
UL Type 1Enclosure types (UL
50/50E) UL Type Open (option +P940)
UL Type 12 (option +B056)
ACS880-11-…
072A-3
087A-3
065A-5
077A-5
Drive types not avail-
able for IP55 (UL Type
12)
IIIOvervoltage category
(IEC/EN 60664-1)
IProtective class
(IEC/EN 61800-5-1)
Materials
• PC/ABS 3 mm, color RAL 9002 and RAL 9017
• PC+10%GF 3.0mm, color RAL 9017 (in two smallest R3 frames only)
• Plastic parts are made of UV resistant f1 classified plastics
• Zinc coated steel sheet 1.5 to 2.5 mm, thickness of coating 100 micro-
meters, color RAL 9002
Drive enclosure
Plywood, cardboard and molded pulp. Foam cushions PE, PP-E, bands
PP.
Package
The main parts of the drive can be recycled to preserve natural resources
and energy. Product parts and materials should be dismantled and
separated.
Disposal
Generally all metals, such as steel, aluminum, copper and its alloys, and
precious metals can be recycled as material. Plastics, rubber, cardboard
and other packaging material can be used in energy recovery. Printed
circuit boards and large electrolytic capacitors need selective treatment
according to IEC 62635 guidelines. To aid recycling, plastic parts are
marked with an appropriate identification code.
Contact your local distributor for further information on environmental
aspects and recycling instructions for professional recyclers. End of life
treatment must follow international and local regulations.
192 Technical data
To Next Page
Loading...
