2
Introduction to the manual
Contents of this chapter
This chapter describes the intended audience and contents of the manual. It contains
a flowchart of steps in examining the delivery, installing and commissioning the drive.
The flowchart refers to chapters/sections in this manual and other manuals.
Target audience
This manual is intended for people who plan the installation, install, start-up and do
maintenance work on the drive, or create instructions for the end user of the drive
concerning the installation and maintenance of the drive.
Read the manual before working on the drive. You are expected to know the
fundamentals of electricity, wiring, electrical components and electrical schematic
symbols.
Categorization by frame size and option code
The frame size identifies information which concerns only a certain frame size of the
drive. The frame size is shown on the type designation label. All frame sizes are listed
in the technical data.
The option code (A123) identifies information which concerns only a certain optional
selection. The options included in the drive are listed on the type designation label.
Quick installation, commissioning and operation flowchart
SeeTask
Type designation label (page 35)
Identify the frame of your drive: R3, R6 or R8.
Introduction to the manual 21
To Next Page
Loading...
