ABB ACS880-11 - Page 219

Parameters 219
22.77 Motor
potentiometer max
value
Defines the maximum value of the motor potentiometer. 1500.00
-32768.00 …
32767.00
Motor potentiometer maximum. 1 = 1
22.80 Motor
potentiometer ref
act
Displays the output of the motor potentiometer function. (The
motor potentiometer is configured using parameters
22.71…22.74.)
This parameter is read-only.
-
-32768.00 …
32767.00
Value of motor potentiometer. 1 = 1
22.81 Speed reference
act 1
Displays the value of speed reference source 1 (selected by
parameter 22.11 Speed ref1 source). See the control chain
diagram on page 582.
This parameter is read-only.
-
-30000.00 …
30000.00 rpm
Value of reference source 1. See par.
46.01
22.82 Speed reference
act 2
Displays the value of speed reference source 2 (selected by
parameter 22.12 Speed ref2 source). See the control chain
diagram on page 582.
This parameter is read-only.
-
-30000.00 …
30000.00 rpm
Value of reference source 2. See par.
46.01
22.83 Speed reference
act 3
Displays the value of speed reference after the mathematical
function applied by parameter 22.13 Speed ref1 function and
reference 1/2 selection (22.14 Speed ref1/2 selection). See
the control chain diagram on page 582.
This parameter is read-only.
-
-30000.00 …
30000.00 rpm
Speed reference after source selection. See par.
46.01
22.84 Speed reference
act 4
Displays the value of speed reference after application of 1st
speed additive (22.15 Speed additive 1 source). See the
control chain diagram on page 582.
This parameter is read-only.
-
-30000.00 …
30000.00 rpm
Speed reference after additive 1. See par.
46.01
22.85 Speed reference
act 5
Displays the value of speed reference after the application of
the speed share scaling factor (22.16 Speed share). See the
control chain diagram on page 582
.
This parameter is read-only.
-
-30000.00 …
30000.00 rpm
Speed reference after speed share scaling. See par.
46.01
22.86 Speed reference
act 6
Displays the value of speed reference after application of 2nd
speed additive (22.17 Speed additive 2 source). See the
control chain diagram on page 582.
This parameter is read-only.
-
-30000.00 …
30000.00 rpm
Speed reference after additive 2. See par.
46.01
No. Name/Value Description Def/FbEq16