Installation checklist 67
Installation checklist
What this chapter contains
This chapter contains a list for checking the mechanical and electrical installation of
the drive module.
Installation checklist
Go through the checklist below together with another person.
WARNING! Obey the safety instructions in chapter Safety instructions.
If you ignore them, injury or death, or damage to the equipment can
occur.
Check that …
Cabinet construction
The drive module is attached correctly to the cabinet. (See chapters Guidelines for
planning the cabinet installation and Mechanical installation.)
Mechanical joints are tightened and not broken.
Parts are clean and painted surfaces not scratched.
The cabinet frame and parts which are in metal to metal contact with the frame (for
example seams, component fixing points on assembly plates, back of control unit
mounting plate) are not finished with non-conducting paint or material.
Degree of protection (IPxx)
To Next Page
Loading...
