ABB ACS880 N5700 Series - Page 172

Def / Type
FbEq 16b / 32b
DescriptionName / Range /
Selection
No.
0 / uint16Displays the FPGA logic version of module detected in
slot 1 of the drive control unit.
The logic version is detected for DDCS option modules,
for example, FEN encoder modules (FEN-01, FEN-11,
FEN-21, FEN-31) and I/O modules (FIO-11, FDIO-01,
FAIO-01).
Slot 1 module logic
version
7.54
1 = 1Logic version of module detected in slot 1.0000…FFFFh
- / uint16Displays the software version of module detected in
slot 1 of the drive control unit.
Slot 1 module
software version
7.55
0 / uint16Displays the FPGA logic version of module detected in
slot 2 of the drive control unit.
The logic version is detected for DDCS option modules,
for example, FEN encoder modules (FEN-01, FEN-11,
FEN-21, FEN-31) and I/O modules (FIO-11, FDIO-01,
FAIO-01).
Slot 2 module logic
version
7.56
1 = 1Logic version of module detected in slot 2.0000…FFFFh
- / uint16Displays the software version of module detected in
slot 2 of the drive control unit.
Slot 2 module
software version
7.57
0 / uint16Displays the FPGA logic version of module detected in
slot 3 of the drive control unit.
The logic version is detected for DDCS option modules,
for example, FEN encoder modules (FEN-01, FEN-11,
FEN-21, FEN-31) and I/O modules (FIO-11, FDIO-01,
FAIO-01).
Slot 3 module logic
version
7.58
1 = 1Logic version of module detected in slot 3.0000…FFFFh
- / uint16Displays the software version of module detected in
slot 3 of the drive control unit.
Slot 3 module
software version
7.59
0 / uint32 (Only visible when IGBT supply unit control activated
by 95.20 )
Name of the loading package of the supply unit
firmware.
LSU loading package
name
7.106
0 / uint32 (Only visible when IGBT supply unit control activated
by 95.20 )
Version number of the loading package of the supply
unit firmware.
LSU loading package
version
7.107
172 Parameters