ABB ACS880 - Page 197

Def / Type
FbEq 16b / 32b
DescriptionName / Range /
Selection
No.
Reservedb2
1 = The encoder feedback configuration is preventing
the drive from starting.
Encoder feedbackb3
1 = A reference source parametrization conflict is
preventing the drive from starting. See warning A6DA
Reference source parametrization.
Ref source
parametrization
b4
Reservedb5…15
1 = 10000h…FFFFh
Above limit / uint32Selects a binary source whose status is transmitted as
bit 10 of 6.11 Main status word.
MSW bit 10 sel6.29
00False
11True
2Bit 10 of 6.17 Drive status word 2 (page 193).Above limit
See Terms and abbreviations (page 169).Other [bit]
Ext ctrl loc / uint32Selects a binary source whose status is transmitted as
bit 11 of 6.11 Main status word.
MSW bit 11 sel6.30
00False
11True
2Bit 11 of 6.1 Main control word (page 191).Ext ctrl loc
See Terms and abbreviations (page 169).Other [bit]
Ext run enable /
uint32
Selects a binary source whose status is transmitted as
bit 12 of 6.11 Main status word.
MSW bit 12 sel6.31
00False
11True
2Inverted bit 5 of 6.18 Start inhibit status
word (page 194).
Ext run enable
See Terms and abbreviations (page 169).Other [bit]
False / uint32Selects a binary source whose status is transmitted as
bit 13 of 6.11 Main status word.
MSW bit 13 sel6.32
00False
11True
See Terms and abbreviations (page 169).Other [bit]
False / uint32Selects a binary source whose status is transmitted as
bit 14 of 6.11 Main status word.
MSW bit 14 sel6.33
00False
11True
See Terms and abbreviations (page 169).Other [bit]
Parameters 197