ABB ACS880 - Page 198

Def / Type
FbEq 16b / 32b
DescriptionName / Range /
Selection
No.
MCW user bit 0 /
uint32
Selects a binary source whose status is transmitted as
bit 12 of the Follower control word to follower drives.
(Bits 0…11 of the Follower control word are taken from
6.1 Main control word.)
See also section Master/follower
functionality (page 72).
Follower CW user bit
0 selection
6.45
00FALSE
11TRUE
2Bit 12 of 6.1 Main control word (page 191).MCW user bit 0
3Bit 13 of 6.1 Main control word (page 191).MCW user bit 1
4Bit 14 of 6.1 Main control word (page 191).MCW user bit 2
5Bit 15 of 6.1 Main control word (page 191).MCW user bit 3
See Terms and abbreviations (page 169).Other [bit]
MCW user bit 1 /
uint32
Selects a binary source whose status is transmitted as
bit 13 of the Follower control word to follower drives.
(Bits 0…11 of the Follower control word are taken from
6.1 Main control word.)
Follower CW user bit
1 selection
6.46
00FALSE
11TRUE
2Bit 12 of 6.1 Main control word (page 191).MCW user bit 0
3Bit 13 of 6.1 Main control word (page 191).MCW user bit 1
4Bit 14 of 6.1 Main control word (page 191).MCW user bit 2
5Bit 15 of 6.1 Main control word (page 191).MCW user bit 3
See Terms and abbreviations (page 169).Other [bit]
MCW user bit 2 /
uint32
Selects a binary source whose status is transmitted as
bit 14 of the Follower control word to follower drives.
(Bits 0…11 of the Follower control word are taken from
6.1 Main control word.)
Follower CW user bit
2 selection
6.47
00FALSE
11TRUE
2Bit 12 of 6.1 Main control word (page 191).MCW user bit 0
3Bit 13 of 6.1 Main control word (page 191).MCW user bit 1
4Bit 14 of 6.1 Main control word (page 191).MCW user bit 2
5Bit 15 of 6.1 Main control word (page 191).MCW user bit 3
See Terms and abbreviations (page 169).Other [bit]
MCW user bit 3 /
uint32
Selects a binary source whose status is transmitted as
bit 15 of the Follower control word to follower drives.
(Bits 0…11 of the Follower control word are taken from
6.1 Main control word.)
Follower CW user bit
3 selection
6.48
00FALSE
11TRUE
2Bit 12 of 6.1 Main control word (page 191).MCW user bit 0
198 Parameters