ABB ACS880 - Page 304

Def / Type
FbEq 16b / 32b
DescriptionName / Range /
Selection
No.
Reservedb2…15
1 = 10000h…FFFFh
DI5 / uint32When bit 0 of parameter 22.21 Constant speed function
is 0 (Separate), selects a source that activates constant
speed 1.
When bit 0 of parameter 22.21 Constant speed function
is 1 (Packed), this parameter and parameters 22.23
Constant speed sel2 and 22.24 Constant speed sel3
select three sources whose states activate constant
speeds as follows:
Constant
speed active
Source
defined by
par. 22.24
Source
defined by
par. 22.23
Source
defined by
par. 22.22
None000
Constant
speed 1
001
Constant
speed 2
010
Constant
speed 3
011
Constant
speed 4
100
Constant
speed 5
101
Constant
speed 6
110
Constant
speed 7
111
Constant speed sel122.22
00Not selected
11Selected
2Digital input DI1 (10.2 DI delayed status, bit 0).DI1
3Digital input DI2 (10.2 DI delayed status, bit 1).DI2
4Digital input DI3 (10.2 DI delayed status, bit 2).DI3
5Digital input DI4 (10.2 DI delayed status, bit 3).DI4
6Digital input DI5 (10.2 DI delayed status, bit 4).DI5
7Digital input DI6 (10.2 DI delayed status, bit 5).DI6
10Digital input/output DIO1 (11.2 DIO delayed status, bit
0).
DIO1
11Digital input/output DIO2 (11.2 DIO delayed status, bit
1).
DIO2
See Terms and abbreviations (page 169).Other [bit]
304 Parameters