ABB ACS880 - Page 305

Def / Type
FbEq 16b / 32b
DescriptionName / Range /
Selection
No.
Not selected / uint32When bit 0 of parameter 22.21 Constant speed function
is 0 (Separate), selects a source that activates constant
speed 2.
When bit 0 of parameter 22.21 Constant speed function
is 1 (Packed), this parameter and parameters 22.22
Constant speed sel1 and 22.24 Constant speed sel3
select three sources that are used to activate constant
speeds. See table at parameter 22.22 Constant speed
sel1.
For the selections, see parameter 22.22 Constant speed
sel1.
Constant speed sel222.23
Not selected / uint32When bit 0 of parameter 22.21 Constant speed function
is 0 (Separate), selects a source that activates constant
speed 3.
When bit 0 of parameter 22.21 Constant speed function
is 1 (Packed), this parameter and parameters 22.22
Constant speed sel1 and 22.23 Constant speed sel2
select three sources that are used to activate constant
speeds. See table at parameter 22.22 Constant speed
sel1.
For the selections, see parameter 22.22 Constant speed
sel1.
Constant speed sel322.24
300.00 rpm / real32Defines constant speed 1 (the speed the motor will turn
when constant speed 1 is selected).
Constant speed 122.26
- / -Constant speed 1. For scaling, see parameter 46.1.-30000.00 ...
30000.00 rpm
0.00 rpm / real32Defines constant speed 2.Constant speed 222.27
- / -Constant speed 2. For scaling, see parameter 46.1.-30000.00 ...
30000.00 rpm
0.00 rpm / real32Defines constant speed 3.Constant speed 322.28
- / -Constant speed 3. For scaling, see parameter 46.1.-30000.00 ...
30000.00 rpm
0.00 rpm / real32Defines constant speed 4.Constant speed 422.29
- / -Constant speed 4. For scaling, see parameter 46.1.-30000.00 ...
30000.00 rpm
0.00 rpm / real32Defines constant speed 5.Constant speed 522.30
- / -Constant speed 5. For scaling, see parameter 46.1.-30000.00 ...
30000.00 rpm
0.00 rpm / real32Defines constant speed 6.Constant speed 622.31
- / -Constant speed 6. For scaling, see parameter 46.1.-30000.00 ...
30000.00 rpm
0.00 rpm / real32Defines constant speed 7.Constant speed 722.32
- / -Constant speed 7. For scaling, see parameter 46.1.-30000.00 ...
30000.00 rpm
Parameters 305