ABB ACS880 - Page 309

Def / Type
FbEq 16b / 32b
DescriptionName / Range /
Selection
No.
1 = 1 / 100 = 1Value of motor potentiometer.-32768.00 ...
32767.00
- / real32Displays the value of speed reference source 1 (selected
by parameter 22.11 Speed ref1 source). See the control
chain diagram on page 744.
This parameter is read-only.
Speed reference act
1
22.81
- / -Value of reference source 1. For scaling, see parameter
46.1.
-30000.00 ...
30000.00 rpm
- / real32Displays the value of speed reference source 2 (selected
by parameter 22.12 Speed ref2 source). See the control
chain diagram on page 744.
This parameter is read-only.
Speed reference act
2
22.82
- / -Value of reference source 2. For scaling, see parameter
46.1.
-30000.00 ...
30000.00 rpm
- / real32Displays the value of speed reference after the
mathematical function applied by parameter 22.13
Speed ref1 function and reference 1/2 selection (22.14
Speed ref1/2 selection). See the control chain diagram
on page 744.
This parameter is read-only.
Speed reference act
3
22.83
- / -Speed reference after source selection. For scaling, see
parameter 46.1.
-30000.00 ...
30000.00 rpm
- / real32Displays the value of speed reference after application
of 1st speed additive (22.15 Speed additive 1 source).
See the control chain diagram on page 744.
This parameter is read-only.
Speed reference act
4
22.84
- / -Speed reference after additive 1. For scaling, see
parameter 46.1.
-30000.00 ...
30000.00 rpm
- / real32Displays the value of speed reference after the
application of the speed share scaling factor (22.16
Speed share). See the control chain diagram on page
744.
This parameter is read-only.
Speed reference act
5
22.85
- / -Speed reference after speed share scaling. For scaling,
see parameter 46.1.
-30000.00 ...
30000.00 rpm
- / real32Displays the value of speed reference after application
of 2nd speed additive (22.17 Speed additive 2 source).
See the control chain diagram on page 744.
This parameter is read-only.
Speed reference act
6
22.86
- / -Speed reference after additive 2. For scaling, see
parameter 46.1.
-30000.00 ...
30000.00 rpm
Parameters 309