Def / Type
FbEq 16b / 32b
DescriptionName / Range /
Selection
No.
0.00 / real32Storage parameter for receiving a process setpoint
value eg. through the embedded fieldbus interface.
The value can be sent to the drive as Modbus I/O data.
Set the target selection parameter of that particular
data (58.101…58.124) to Setpoint data storage. In 40.16
Set 1 setpoint 1 source (or 40.17 Set 1 setpoint 2 source),
select Setpoint data storage.
Setpoint data
storage
40.92
100 = 1 / 100 = 1Storage parameter for process setpoint.-327.68 ... 327.67
434 Parameters
To Next Page
Loading...
