ABB ACS880 - Process PID Set

Def / Type
FbEq 16b / 32b
DescriptionName / Range /
Selection
No.
A second set of parameter values for process PID
control.
Process PID set 241
The selection between this set and first set (parameter
group 40 Process PID set 1) is made by parameter 40.57
PID set1/set2 selection.
See section Process PID control (page 109). See also
parameters 40.01…40.06, 40.91, 40.92, and the control
chain diagrams on pages 758 and 759.
Off / uint16See parameter 40.7 Set 1 PID operation mode.Set 2 PID operation
mode
41.7
AI1 scaled / uint32See parameter 40.8 Set 1 feedback 1 source.Set 2 feedback 1
source
41.8
Not selected / uint32See parameter 40.9 Set 1 feedback 2 source.Set 2 feedback 2
source
41.9
In1 / uint16See parameter 40.10 Set 1 feedback function.Set 2 feedback
function
41.10
0.000 s / real32See parameter 40.11 Set 1 feedback filter time.Set 2 feedback filter
time
41.11
% / uint16Defines the unit for parameters 41.21…41.24 and 41.47.Set 2 unit selection41.12
7rpm.rpm
4%.%
3Hz.Hz
249User-definable unit 2. The name of the unit can be
edited on the control panel by choosing Menu – Settings
– Edit texts.
PID user unit 2
100.00 / real32See parameter 40.14 Set 1 setpoint scaling.Set 2 setpoint
scaling
41.14
1500.00; 1800.00
(95.20 b0) / real32
See parameter 40.15 Set 1 output scaling.Set 2 output scaling41.15
Internal setpoint /
uint32
See parameter 40.16 Set 1 setpoint 1 source.Set 2 setpoint 1
source
41.16
Not selected / uint32See parameter 40.17 Set 1 setpoint 2 source.Set 2 setpoint 2
source
41.17
In1 or In2 / uint16See parameter 40.18 Set 1 setpoint function.Set 2 setpoint
function
41.18
Not selected / uint32See parameter 40.19 Set 1 internal setpoint sel1.Set 2 internal
setpoint sel1
41.19
Not selected / uint32See parameter 40.20 Set 1 internal setpoint sel2.Set 2 internal
setpoint sel2
41.20
- / real32See parameter 40.21 Set 1 internal setpoint 1.Set 2 internal
setpoint 1
41.21
- / real32See parameter 40.22 Set 1 internal setpoint 2.Set 2 internal
setpoint 2
41.22
- / real32See parameter 40.23 Set 1 internal setpoint 3.Set 2 internal
setpoint 3
41.23
Parameters 435