Def / Type
FbEq 16b / 32b
DescriptionName / Range /
Selection
No.
Settings for the energy saving calculators.Energy efficiency45
See also section Energy saving calculators (page 138).
0 GWh / uint16Displays the energy saved in GWh compared to
direct-on-line motor connection. This parameter is
incremented when 45.2 Saved MW hours.
Saved GW hours45.1
This parameter is read-only (see parameter 45.21
Energy calculations reset).
1 = 1 GWh / 1 = 1 GWhEnergy savings in GWh.0...65535 GWh
0 MWh / uint16Displays the energy saved in MWh compared to
direct-on-line motor connection. This parameter is
incremented when 45.3 Saved kW hours rolls over.
Saved MW hours45.2
When this parameter rolls over, parameter 45.1 Saved
GW hours is incremented.
This parameter is read-only (see parameter 45.21
Energy calculations reset).
1 = 1 MWh / 1 = 1 MWhEnergy savings in MWh.0...999 MWh
0.0 kWh / uint16Displays the energy saved in kWh compared to
direct-on-line motor connection.
Saved kW hours45.3
If the internal brake chopper of the drive is enabled, all
energy fed by the motor to the drive is assumed to be
converted into heat, but the calculation still records
savings made by controlling the speed. If the chopper
is disabled, then regenerated energy from the motor
is also recorded here.
When this parameter rolls over, parameter 45.2 Saved
MW hours is incremented.
This parameter is read-only (see parameter 45.21
Energy calculations reset).
10 = 1 kWh / 10 = 1
kWh
Energy savings in kWh.0.0 ... 999.9 kWh
0 thousands / uint32Displays the monetary savings in thousands compared
to direct-on-line motor connection. This parameter is
incremented when 45.6 Saved money rolls over.
Saved money x100045.5
The currency is defined by parameter 45.17 Tariff
currency unit.
This parameter is read-only (see parameter 45.21
Energy calculations reset).
- / -Monetary savings in thousands of units.0...4294967295
thousands
0.00 units / uint32Displays the monetary savings compared to
direct-on-line motor connection. This value is a
Saved money45.6
calculated by multiplying the saved energy in kWh by
the currently active energy tariff (45.14 Tariff selection).
When this parameter rolls over, parameter 45.5 Saved
money x1000 is incremented.
The currency is defined by parameter 45.17 Tariff
currency unit.
This parameter is read-only (see parameter 45.21
Energy calculations reset).
1 = 1 units / 100 = 1
units
Monetary savings.0.00 ... 999.99 units
Parameters 447