ABB ACS880 - Page 511

Def / Type
FbEq 16b / 32b
DescriptionName / Range /
Selection
No.
None / uint32Defines a target for the data received as word 3 from
the first follower (ie. the follower with node address 2)
through the master/follower link.
See also parameter 62.30 Follower node 2 data 3 value.
For the selections, see parameter 62.4 Follower node
2 data 1 sel.
Follower node 2 data
3 sel
62.6
Follower SW / uint32Defines a target for the data received as word 1 from
the second follower (ie. the follower with node address
3) through the master/follower link.
See also parameter 62.31 Follower node 3 data 1 value.
For the selections, see parameter 62.4 Follower node
2 data 1 sel.
Follower node 3 data
1 sel
62.7
None / uint32Defines a target for the data received as word 2 from
the second follower (ie. the follower with node address
3) through the master/follower link.
See also parameter 62.32 Follower node 3 data 2 value.
For the selections, see parameter 62.4 Follower node
2 data 1 sel.
Follower node 3 data
2 sel
62.8
None / uint32Defines a target for the data received as word 3 from
the second follower (ie. the follower with node address
3) through the master/follower link.
See also parameter 62.33 Follower node 3 data 3 value.
For the selections, see parameter 62.4 Follower node
2 data 1 sel.
Follower node 3 data
3 sel
62.9
Follower SW / uint32Defines a target for the data received as word 1 from
the third follower (ie. the follower with node address
4) through the master/follower link.
See also parameter 62.34 Follower node 4 data 1 value.
For the selections, see parameter 62.4 Follower node
2 data 1 sel.
Follower node 4
data 1 sel
62.10
None / uint32Defines a target for the data received as word 2 from
the third follower (ie. the follower with node address
4) through the master/follower link.
See also parameter 62.35 Follower node 4 data 2 value.
For the selections, see parameter 62.4 Follower node
2 data 1 sel.
Follower node 4
data 2 sel
62.11
None / uint32Defines a target for the data received as word 3 from
the third follower (ie. the follower with node address
4) through the master/follower link.
See also parameter 62.36 Follower node 4 data 3 value.
For the selections, see parameter 62.4 Follower node
2 data 1 sel.
Follower node 4
data 3 sel
62.12
- / uint16(Follower only) Displays, in integer format, the data
received from the master as word 1.
Parameter 62.1 M/F data 1 selection can be used to
select a target for the received data. This parameter
can also be used as a signal source by other
parameters.
M/F data 1 value62.25
- / -Data received as word 1 in master/follower
communication.
0...65535
Parameters 511