EasyManua.ls Logo

ABB ACS880 - Page 513

ABB ACS880
764 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Def / Type
FbEq 16b / 32b
DescriptionName / Range /
Selection
No.
- / -Data received as word 1 from follower with node
address 3.
0...65535
- / uint16Displays, in integer format, the data received from the
second follower (ie. follower with node address 3) as
word 2.
Parameter 62.8 Follower node 3 data 2 sel can be used
to select a target for the received data. This parameter
can also be used as a signal source by other
parameters.
Follower node 3 data
2 value
62.32
- / -Data received as word 2 from follower with node
address 3.
0...65535
- / uint16Displays, in integer format, the data received from the
second follower (ie. follower with node address 3) as
word 3.
Parameter 62.9 Follower node 3 data 3 sel can be used
to select a target for the received data. This parameter
can also be used as a signal source by other
parameters.
Follower node 3 data
3 value
62.33
- / -Data received as word 3 from follower with node
address 3.
0...65535
- / uint16Displays, in integer format, the data received from the
third follower (ie. follower with node address 4) as word
1.
Parameter 62.10 Follower node 4 data 1 sel can be used
to select a target for the received data. This parameter
can also be used as a signal source by other
parameters.
Follower node 4
data 1 value
62.34
- / -Data received as word 1 from follower with node
address 4.
0...65535
- / uint16Displays, in integer format, the data received from the
third follower (ie. follower with node address 4) as word
2.
Parameter 62.11 Follower node 4 data 2 sel can be used
to select a target for the received data. This parameter
can also be used as a signal source by other
parameters.
Follower node 4
data 2 value
62.35
- / -Data received as word 2 from follower with node
address 4.
0...65535
- / uint16Displays, in integer format, the data received from the
third follower (ie. follower with node address 4) as word
3.
Parameter 62.12 Follower node 4 data 3 sel can be used
to select a target for the received data. This parameter
can also be used as a signal source by other
parameters.
Follower node 4
data 3 value
62.36
- / -Data received as word 3 from follower with node
address 4.
0...65535
Parameters 513

Table of Contents

Other manuals for ABB ACS880

Related product manuals