ABB ACS880 - Page 516

Def / Type
FbEq 16b / 32b
DescriptionName / Range /
Selection
No.
1 = Follower 28 ready.Follower 28b11
1 = Follower 29 ready.Follower 29b12
1 = Follower 30 ready.Follower 30b13
1 = Follower 31 ready.Follower 31b14
1 = Follower 32 ready.Follower 32b15
1 = 10000h…FFFFh
None / uint32Parameters 62.45…62.50 define a target for the data
received in data sets 1 and 3 from the external
controller. These data sets are used in ModuleBus
communication with a “standard drive” (60.50 DDCS
controller drive type = ABB standard drive).
Parameters 62.95…62.100 display the data received
from the external controller in integer format, and can
be used as sources by other parameters.
For example, this parameter selects a target for word
1 of data set 1. Parameter 62.95 Data set 1 data 1 value
displays the received data in integer format, and can
also be used as a source by other parameters.
Data set 1 data 1
selection
62.45
0None.None
1Control Word (16 bits)CW 16bit
2Reference REF1 (16 bits)Ref1 16bit
3Reference REF2 (16 bits)Ref2 16bit
See Terms and abbreviations (page 169).Other [value]
None / uint32Defines a target for the data received as word 2 of data
set 1.
See also parameter 62.96 Data set 1 data 2 value.
For the selections, see parameter 62.45 Data set 1 data
1 selection.
Data set 1 data 2
selection
62.46
None / uint32See parameter 62.45 Data set 1 data 1 selection.Data set 1 data 3
selection
62.47
…………
None / uint32See parameter 62.45 Data set 1 data 1 selection.Data set 3 data 3
selection
62.50
None / uint32Parameters 62.51…62.74 define a target for the data
received in data sets 10, 12, 14, 16, 18, 20, 22 and 24 from
the external controller.
Parameters 62.101…62.124 display the data received
from the external controller in integer format, and can
be used as sources by other parameters.
For example, this parameter selects a target for word
1 of data set 10. Parameter 62.101 Data set 10 data 1
value displays the received data in integer format, and
can also be used as a source by other parameters.
Data set 10 data 1
selection
62.51
0None.None
1Control Word (16 bits)CW 16bit
2Reference REF1 (16 bits)Ref1 16bit
516 Parameters