ABB ACS880 - Page 574

Def / Type
FbEq 16b / 32b
DescriptionName / Range /
Selection
No.
Not selected / uint32Selects a digital source (for example, a limit switch
connected to a digital input) that initializes the position
counter. When the digital source activates, the value
selected by 90.66 Pos counter init value source is
assumed to be the position of the load.
Note: Position counter initialization can be prevented
by parameter 90.68 Disable pos counter initialization.
Pos counter init cmd
source
90.67
00Not selected
11Selected
2Digital input DI1 (10.2 DI delayed status, bit 0).DI1
3Digital input DI2 (10.2 DI delayed status, bit 1).DI2
4Digital input DI3 (10.2 DI delayed status, bit 2).DI3
5Digital input DI4 (10.2 DI delayed status, bit 3).DI4
6Digital input DI5 (10.2 DI delayed status, bit 4).DI5
7Digital input DI6 (10.2 DI delayed status, bit 5).DI6
10Digital input/output DIO1 (11.2 DIO delayed status, bit
0).
DIO1
11Digital input/output DIO2 (11.2 DIO delayed status, bit
1).
DIO2
See Terms and abbreviations (page 169).Other [bit]
Not selected / uint32Selects a source that prevents the initialization of the
position counter.
Disable pos counter
initialization
90.68
00Not selected
11Selected
2Digital input DI1 (10.2 DI delayed status, bit 0).DI1
3Digital input DI2 (10.2 DI delayed status, bit 1).DI2
4Digital input DI3 (10.2 DI delayed status, bit 2).DI3
5Digital input DI4 (10.2 DI delayed status, bit 3).DI4
6Digital input DI5 (10.2 DI delayed status, bit 4).DI5
7Digital input DI6 (10.2 DI delayed status, bit 5).DI6
10Digital input/output DIO1 (11.2 DIO delayed status, bit
0).
DIO1
11Digital input/output DIO2 (11.2 DIO delayed status, bit
1).
DIO2
See Terms and abbreviations (page 169).Other [bit]
Not selected / uint32Selects a source that enables a new initialization of the
position counter, ie. resets bit 4 of 90.35 Pos counter
status.
Reset pos counter
init ready
90.69
00Not selected
11Selected
2Digital input DI1 (10.2 DI delayed status, bit 0).DI1
574 Parameters