ABB ACS880 - Page 590

Def / Type
FbEq 16b / 32b
DescriptionName / Range /
Selection
No.
00Not selected
11Selected
2Digital input DI1 (10.2 DI delayed status, bit 0).DI1
3Digital input DI2 (10.2 DI delayed status, bit 1).DI2
4Digital input DI3 (10.2 DI delayed status, bit 2).DI3
5Digital input DI4 (10.2 DI delayed status, bit 3).DI4
6Digital input DI5 (10.2 DI delayed status, bit 4).DI5
7Digital input DI6 (10.2 DI delayed status, bit 5).DI6
10Digital input/output DIO1 (11.2 DIO delayed status, bit
0).
DIO1
11Digital input/output DIO2 (11.2 DIO delayed status, bit
1).
DIO2
30DIIL input (10.2 DI delayed status, bit 15).DIIL
15 s / uint16Defines the maximum time the supply unit (LSU) is
allowed for charging before a fault, 7584 LSU charge
failedis generated.
LSU max charging
time
94.10
1 = 1 s / 1 = 1 sMaximum charging time.0...65535 s
600.0 s / uint16Defines a stop delay for the supply unit. This parameter
can be used to delay the opening of the main
breaker/contactor when a restart is expected.
LSU stop delay94.11
10 = 1 s / 10 = 1 sSupply unit stop delay.0.0 ... 3600.0 s
- / real32 (Only visible when IGBT supply unit control activated
by 95.20 )
Displays the DC voltage reference sent to the supply
unit.
Note: This parameter is read-only.
DC voltage reference94.20
10 = 1 V / 10 = 1 VDC voltage reference sent to supply unit.0.0 ... 2000.0 V
User ref / uint32 (Only visible when IGBT supply unit control activated
by 95.20 )
Selects the source of the DC voltage reference to be
sent to the supply unit.
DC voltage ref
source
94.21
0None.Zero
194.22 User DC voltage reference.User ref
See Terms and abbreviations (page 169).Other [value]
0.0 V / real32 (Only visible when IGBT supply unit control activated
by 95.20 )
Defines the DC voltage reference for the supply unit
when 94.21 DC voltage ref source is set to User ref.
User DC voltage
reference
94.22
10 = 1 V / 10 = 1 VUser DC reference.0.0 ... 2000.0 V
590 Parameters