ABB ACS880 - O Bus Fan Identification

Def / Type
FbEq 16b / 32b
DescriptionName / Range /
Selection
No.
Distributed I/O bus settings.I/O bus fan
identification
209
This group is only visible with a BCU control unit.
This group contain parameters related to the
distributed I/O bus, which is used with some drives for
monitoring the cooling fans of the cabinet system. For
details, refer to CIO-01 I/O module for distributed I/O
bus control user’s manual (3AXD50000126880
[English]).
0.0 Hz / real32Displays the result of the identification run for fan 1 of
node 1.
Node 1 fan 1 pulse
freq
209.1
1 Hz / 10 HzResult of the identification run for fan 1 of node 1.0.0 ... 5000.0 Hz
0.0 Hz / real32Displays the result of the identification run for fan 2 of
node 1.
Node 1 fan 2 pulse
freq
209.2
1 Hz / 10 HzResult of the identification run for fan 1 of node 2.0.0 ... 5000.0 Hz
0.0 Hz / real32Displays the result of the identification run for fan 3 of
node 1.
Node 1 fan 3 pulse
freq
209.3
1 Hz / 10 HzResult of the identification run for fan 3 of node 1.0.0 ... 5000.0 Hz
0.0 Hz / real32Displays the result of the identification run for fan 4 of
node 1.
Node 1 fan 4 pulse
freq
209.4
1 Hz / 10 HzResult of the identification run for fan 4 of node 1.0.0 ... 5000.0 Hz
0.0 Hz / real32Displays the result of the identification run for fan 1 of
node 2.
Node 2 fan 1 pulse
freq
209.5
1 Hz / 10 HzResult of the identification run for fan 1 of node 2.0.0 ... 5000.0 Hz
0.0 Hz / real32Displays the result of the identification run for fan 2 of
node 2.
Node 2 fan 2 pulse
freq
209.6
1 Hz / 10 HzResult of the identification run for fan 2 of node 2.0.0 ... 5000.0 Hz
0.0 Hz / real32Displays the result of the identification run for fan 3 of
node 2.
Node 2 fan 3 pulse
freq
209.7
1 Hz / 10 HzResult of the identification run for fan 3 of node 2.0.0 ... 5000.0 Hz
0.0 Hz / real32Displays the result of the identification run for fan 4 of
node 2.
Node 2 fan 4 pulse
freq
209.8
1 Hz / 10 HzResult of the identification run for fan 4 of node 2.0.0 ... 5000.0 Hz
0.0 Hz / real32Displays the result of the identification run for fan 1 of
node 3.
Node 3 fan 1 pulse
freq
209.9
1 Hz / 10 HzThis is the block, where writer describes in more details
how the values of parameters should be interpreted.
0.0 ... 5000.0 Hz
0.0 Hz / real32Displays the result of the identification run for fan 2 of
node 3.
Node 3 fan 2 pulse
freq
209.10
1 Hz / 10 HzResult of the identification run for fan 2 of node 3.0.0 ... 5000.0 Hz
0.0 Hz / real32Displays the result of the identification run for fan 3 of
node 3.
Node 3 fan 3 pulse
freq
209.11
1 Hz / 10 HzResult of the identification run for fan 3 of node 30.0 ... 5000.0 Hz
0.0 Hz / real32Displays the result of the identification run for fan 4 of
node 3.
Node 3 fan 4 pulse
freq
209.12
644 Parameters