ABB ACS880 - Markings

Markings
CE mark
Product complies with the applicable European Union legislation. For fulfilling the EMC requirements,
see the additional information concerning the drive EMC compliance (IEC/EN 61800-3).
UL Listed mark for USA and Canada
Product has been tested and evaluated against the relevant North American standards by the Un-
derwriters Laboratories. Valid with rated voltages up to 600 V.
• Cabinet-installed multidrives: The drive with the option +C129 is UL Listed.
• Multidrive modules: The multidrive modules are UL Listed as standard.
CSA certification mark for USA and Canada
Product has been tested and evaluated against the relevant North American standards by
the CSA Group. Valid with rated voltages up to 600 V.
• Cabinet-installed multidrives: Product with option +C134 is CSA certified.
• Multidrive modules: Product is CSA certified as standard.
EAC (Eurasian Conformity) mark
Product complies with the technical regulations of the Eurasian Customs Union. EAC mark is required
in Russia, Belarus and Kazakhstan.
RCM mark
Product complies with Australian and New Zealand requirements specific to EMC, telecommunica-
tions and electrical safety. For fulfilling the EMC requirements, see the additional information con-
cerning the drive EMC compliance (IEC/EN 61800-3).
Electronic Information Products (EIP) green mark
The product complies with the People’s Republic of China Electronic Industry Standard (SJ/T 11364-
2014). The product does not contain toxic and hazardous substances or elements above the
maximum concentration values, and it is an environmentally-friendly product which can be recycled.
TÜV Safety Approved mark (functional safety)
Product contains Safe Torque Off and possibly other (optional) safety functions which are certified
by TÜV according to the relevant functional safety standards. Applicable to drives and inverters;
not applicable to supply, brake or DC/DC converter units or modules.
WEEE mark
At the end of life the product should enter the recycling system at an appropriate collection point
and not placed in the normal waste stream.
KC mark
Product complies with Korea’s product safety requirements for electrical and electronic equipment
and components that utilize power from 50…1000 V AC.
46 Standards and markings