ABB ACSM1 - Page 371

Application program template
371
TORQ REF SEL
1
TLF1 5 00 µsec (1)
32.01 TORQ REF1 SEL
(Drive value)
32.02 TORQ REF ADD SEL
(Drive value)
3.09 TORQ REF1
3.12 TORQUE REF ADD
TORQ REF MOD
2
TLF1 500 µsec (2)
< 32.03 TORQ REF IN
[ TORQ REF1 ] (8 / 3.09)
32.04 MAXIMUM TORQ REF
(Drive value)
32.05 MINIMU M TORQ REF
(Drive value)
32.06 LOAD SHARE
(Drive value)
32.07 TORQ RAMP UP
(Drive value)
32.08 TORQ RAMP DOWN
(Drive value)
3.10 TORQ REF RAMPED
3.11 TORQ REF RUSHLIM
REFERENCE CTRL
29
TLF8 250 µsec (3)
< 34.01 EXT1/EXT2 SEL
(Drive value)
< 34.02 EXT1 MODE 1/2SEL
(Drive value)
34.03 EXT1 CTRL MODE1
(Drive value)
34.04 EXT1 CTRL MODE2
(Drive value)
34.05 EXT2 CTRL MODE1
(Drive value)
34.07 LOCAL CTRL MODE
(Drive value)
< 34.08 TREF SPEED SRC
TORQ R EF SP CTRL (7 / 3.08)
< 34.09 TREF TORQ SRC
TORQ R EF RUSH LIM (8 / 3.11)
< 34.10 TORQ REF ADD SRC
[ TORQUE REF ADD ] (8 / 3.12)
3.13 TORQ REF TO TC
6.12 OP MODE ACK
P age 8 Torqu e R ef FWA c om pat ib ilit y level = 1.46 Firmware Library ID = 1, ver = 1.0 Stan da rd Lib r ary ID = 10000, ver = 1.1
Based on Customer Cust. Doc. No. Date
Prepared Approved Project name
Title Doc. des.
Resp. dept. Doc. No.