ABB ACSM1 - Page 372

Application program template
372
PROFILE REF SEL
8
TLF6 5 00 µsec (1)
65.01 POS REFSOURCE
(Drive value)
< 65.02 PROF SET SEL
(Drive value)
< 65.03 POS START 1
(Drive value)
65.04 POS REF 1 SEL
(Drive value)
65.05 POS SPEED 1
(Drive value)
65.06 PROF ACC 1
(Drive value)
65.07 PROF DEC 1
(Drive value)
65.08 PROF FILT TIME 1
(Drive value)
65.09 POS STYLE 1
(Drive value)
65.10 POS END SPEED 1
(Drive value)
< 65.11 POS START 2
(Drive value)
65.12 POS REF 2 SEL
(Drive value)
65.13 POS SPEED 2
(Drive value)
65.14 PROF ACC 2
(Drive value)
65.15 PROF DEC 2
(Drive value)
65.16 PROF FILT TIME 2
(Drive value)
65.17 POS STYLE 2
(Drive value)
65.18 POS END SPEED 2
(Drive value)
65.19 POS REF 1
(Drive value)
65.20 POS REF 2
(Drive value)
65.21 POS REF ADD SEL
(Drive value)
65.22 PROF VEL REF SEL
(Drive value)
65.23 PROF VEL REF1
(Drive value)
65.24 POS START MODE
(Drive value)
4.06 POS REF
4.07 PROF SPEED
4.08 PROF ACC
4.09 PROF DEC
4.10 PROF FILT TIME
4.11 POS STYLE
4.12 POS END SPEED
PROFILE GENERATOR
9
TLF6 5 00 µsec (2)
< 66.01 PROF GENERAT IN
POS REF (9 / 4.06)
66.02 PROF SPEED MUL
(Drive value)
66.03 PROF ACC WEAK SP
(Drive value)
66.04 POS WIN
(Drive value)
< 66.05 POS ENABLE
(Drive value)
4.13 POS REF IPO
4.14 DIST TGT
Page 9 Position Ref FWA c omp at ibil ity le ve l = 1.46 Firmware Library ID = 1, ver = 1.0 Standard Library ID = 10000, ver = 1.1
Based on Customer Cust. Doc. No. Date
Prepared Approved Project name
Title Doc. des.
Resp. dept. Doc. No.