Physical Characteristics
Outline Dimensions See Figures 2-3, 2-4 and 2-5.
Vibration Limits - with
integral Converter
1.5 g @ 10-150 Hz
NOTE
A remotely mounted Signal Converter must be used when vibration
limits are exceeded.
Signal Cable for remote
Converter (supplied
with instrument when
applicable)
Permanently
Installed:
Standard Length 50 feet (15 m)
Optional Length 100ft. (30m), 150ft. (45m) & 200ft. (60m)
Non-Permanently
Installed:
Standard Length 30 feet (9 m)
Optional Length Up to 500 feet (150 m) in 10 feet increments, as specified.
Materials of
Construction
Meter Liner see Section 1.2 Model Number Breakdown
Electrode Assembly see Section 1.2 Model Number Breakdown
Meter Body 304 sst, epoxy finish
Flanges carbon steel or 304 sst, as specified
Meter Housing aluminum, epoxy finish
Electronics Housing cast aluminum, epoxy finish, 316 sst attachment screws,
gasketed covers
Primary Enclosure Rat-
ings
Watertight Housing
(standard)
NEMA 4X, IEC 529 IP65
Series 10DX3000 Magnetic Flowmeter Instruction Manual
1-11
To Next Page
Loading...
