ABB CRB 1300 - Page 421

The tilt unit is located as shown in the figure.
xx2000001479
Required spare parts
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the CRB 1300 via myABB Business Portal,
www.abb.com/myABB.
NoteArticle numberSpare part
Used with protection class IP40.3HAC073083-001Tilt unit
Used with protection class IP67.3HAC077804-001Tilt unit, IP67
3HAC073081-001Tubular
Used with protection class IP40.3HAC073082-001Tubular support
Used with protection class IP67.3HAC077803-001Tubular support, IP67
3HAC073084-001Gear unit, axis 4
3HAC073087-001Motor unit, axis 4
3HAC073088-001Motor unit, axis 5 and axis 6
3HAC065806-001Timing belt, axis 4
3HAC065794-001Timing belt, axis 5
3HAC065788-001Timing belt, axis 6
Replace if damaged.3HAC065805-001Mechanical stop, axis 4, flange
Replace if damaged.3HAC065804-001Mechanical stop, axis 4, slider
Continues on next page
Product manual - CRB 1300 421
3HAC083111-001 Revision: B
© Copyright 2022-2023 ABB. All rights reserved.
5 Repair
5.5.3 Replacing the tubular and tilt unit
Continued