NoteArticle numberEquipment
Content is defined in section
Standard toolkit on page 1087.
-Standard toolkit
Required consumables
NoteArticle numberConsumable
-Cable ties
Base cover, used for CRB 15000-
5/0.95.
3HAB3772-64O-ring
Base cover, used for CRB 15000-
10/1.52 and CRB 15000-12/1.27.
3HAC061327-072O-ring
Lower arm, inner cover of CRB
15000-5/0.95. 1 pcs / cover.
Replace if damaged.
3HAC061327-044O-ring
Lower arm, lower inner cover of
CRB 15000-10/1.52 and CRB
15000-12/1.27.
Replace if damaged.
3HAC061327-075O-ring
Cover for axis 2/3, used for CRB
15000-5/0.95.
Replace if damaged.
3HAC061327-047O-ring
Swing cover, used for CRB
15000-10/1.52 and CRB 15000-
12/1.27.
Replace if damaged.
3HAC061327-074O-ring
Shell Gadus S23HAC042536-001Grease
Isopropanol-Cleaning agent
Loctite 574-Flange sealant
Continues on next page
Product manual - CRB 15000 223
3HAC077389-001 Revision: L
© Copyright 2021 - 2023 ABB. All rights reserved.
5 Repair
5.3.2 Replacing the axis-1 cabling
Continued
To Next Page
Loading...
