ABB CRB 15000 - Page 489

2 Replace the brake release unit.
Required spare parts
Note
The spare parts related to the brake release function using the external tool are
discontinued from Q2 2023.
NoteArticle numberSpare part
Axis 1
Note
The spare parts related to the
brake release function using the
external tool are discontinued
from Q2 2023.
3HAC079144-001Brake release unit
Axes 2, 3, 4 and 5
Note
The spare parts related to the
brake release function using the
external tool are discontinued
from Q2 2023.
3HAC079145-001Brake release unit
Required tools and equipment
NoteArticle numberEquipment
Content is defined in section
Standard toolkit on page 1087.
-Standard toolkit
Required consumables
Note
The spare parts related to the brake release function using the external tool are
discontinued from Q2 2023.
NoteArticle numberConsumable
-Cable ties
Axis-1 brake release unit
Replace if damaged.
3HAB3772-119O-ring
Base cover, used for CRB 15000-
5/0.95.
3HAB3772-64O-ring
Cover for axis 2/3, used for CRB
15000-5/0.95.
Replace if damaged.
3HAC061327-047O-ring
Continues on next page
Product manual - CRB 15000 489
3HAC077389-001 Revision: L
© Copyright 2021 - 2023 ABB. All rights reserved.
5 Repair
5.3.9 Replacing the brake release unit
Continued