ABB CRB 15000 - Page 495

NoteAction
Brake release unit: 3HAC079144-
001
Connect the brake release cable to the board.3
xx2100000417
xx2100000418
Fit the brake release board to the sheet metal.4
Screws: M2x6 12.9 Gleitmo 605 (2
pcs)
Fit the brake release cover and secure with two
screws.
5
Tightening torque: 0.2 Nm.
xx2100000416
Continues on next page
Product manual - CRB 15000 495
3HAC077389-001 Revision: L
© Copyright 2021 - 2023 ABB. All rights reserved.
5 Repair
5.3.9 Replacing the brake release unit
Continued